Breeding work on Amnesia Haze Auto continues
Germination and Transplanting Males into Coco
We are starting a new Amnesia Haze run - yes, that legendary Amnesia everyone knows and loves. It’s a strain so familiar to growers and enthusiasts that, over time, it has almost become taken for granted. That’s exactly why we believe it’s time to push it to the next level and give it a fresh perspective through a new production cycle.

As mentioned in our previous articles, our process always starts with a simple and proven approach. Seeds are first soaked in water for 24–72 hours, allowing them to fully activate before planting. Once ready, they are placed into SABIKA peat starter plugs, a method we consistently rely on for clean starts and reliable early development.
As with all our projects, we begin with the future fathers. They are always started two weeks earlier than the main group of mothers, allowing them to develop calmly and consistently before the rest of the cycle catches up. This timing plays a key role in maintaining proper alignment throughout the later stages.

In the photo collage, you can clearly see the difference created over the course of just one week. The comparison shows plants shortly after being transplanted into coco from peat starter plugs versus the same plants one week later, grown under controlled conditions with manual irrigation. This side-by-side view highlights how quickly Amnesia responds once it establishes itself in the medium and settles into a stable rhythm.
These early stages are especially important for setting the tone of the entire run. Strong, even development at the beginning allows us to move forward with confidence, knowing that the foundation of the cycle is solid and ready for the next phases.
The next stage of this Amnesia Haze run will focus on the mothers. Seeds are about to be initiated, followed by the introduction of approximately 160-180 mother plants into the grow tent. This step will complete the core structure of the cycle and bring all key participants together in one space.
We’ll cover this phase in detail in the next update.
Planting the Mother Plants
In this update, we are sharing a new milestone in the Amnesia Haze cycle. This time, the focus is on the mothers. A time-lapse video captures the introduction of 123 mother plants, turning this stage into a visual snapshot of the scale and rhythm of the project. Alongside the video, we also share a general photo showing how the space looks immediately after planting.
As always, the planting followed our standard and well-tested approach. The coco medium was prepared with an 85/15 blend enriched with humus. Each planting hole received mycorrhiza, supporting early root interaction with the medium. The first watering was done fully by hand, allowing us to carefully observe each plant and ensure an even, confident start.
With all mothers now in place, the structure of the cycle becomes clearly defined. The tent is filled, spacing is set, and the plants can now settle into their environment. This moment is less about action and more about observation. From here, growth will dictate the next steps.
The focus now shifts to timing. We allow the mothers to establish themselves while keeping a close eye on the fathers. As soon as the right window opens, we will move forward with the next phase and begin preparing the males for spraying.

For now, we wait, watch, and let the plants do what they do best. More updates will follow as the cycle continues to unfold.
Visible Growth & Stability
Over the past period, our Amnesia Haze has shown noticeable growth. Plants have expanded their structure, strengthened their stems, and developed evenly across the canopy. At this stage, we can clearly observe that all bushes remain within the same growth spectrum. This uniformity is a very positive signal and directly reflects the genetic stability of the line.
When plants move together in rhythm without extreme variation, it gives us confidence in the foundation we are working with. Stability at this stage sets the tone for everything that follows.

STS Applications & Reversal
During this period, we completed three STS applications on the males. Mobility and precision are essential in this process if the goal is to achieve a strong and high-quality reversal. A light spray is not enough. The solution must be applied thoroughly, ensuring full coverage until runoff begins from the leaves.

Many plants have already shown early signs of reversal. With experience, we are able to detect the first formation of pollen sacs even in the earliest and most subtle stages. As soon as we identify the first clear male expressions, spraying is stopped. Timing here is everything.

Lighting & Flush
Light intensity is currently set at 500 PPFD. This level allows us to maintain steady development without introducing unnecessary stress while plants approach pre-flower.
We also performed a controlled flush using parameters of 1.4 EC and pH 5.9. This step ensures that the medium is free from salt buildup and prevents potential nutrient lockout as plants transition toward flowering. Maintaining a clean and balanced root environment now reduces risks later in the cycle.
Next Phase: Defoliation & Selection
The next step will be defoliation followed by selection. This stage is crucial. We will identify and keep only the strongest and most stable plants. Any individuals lagging behind in development or, on the contrary, stretching too aggressively will be removed immediately.
Our objective is clear. We are searching for the best possible expression of Amnesia. Only plants that demonstrate balance, strength, and structural integrity will move forward in the cycle.
Transition into flowering and huge selection.
At this stage of transitioning into flowering, we noticed a clear inconsistency in structure and growth. Because of this, our goal for the week is to level out the plants — removing those that are too small or differ in structure - so that only one stable phenotype remains. This phenotype should transition into flowering on time, maintain a consistent medium growth rate, and have a uniform plant structure.
After this round of selection, only 60 of the best plants remained out of the original 130.
At this point, we are left with plants that are all very similar to each other - they have transitioned into flowering on time and are ready for pollination. However, this is far from the final selection. In the end, we expect to keep around 15-20 final plants. Further selection will then be completed based on bud structure, and most importantly, in search of that distinctive and widely loved Amnesia terpene profile.
Polination.
This stage is one of the most important in the entire process. Great attention must be paid not only to the selection of the mother plants, but also to the choice of the father pollinators, as they contribute 50% of the genetics to the future offspring. That’s why factors such as size, structure, flowering speed, and stress resistance are all crucial here. In the end, we were left with 2 fathers out of the original 30 - nothing to be done, only the best remain. After selecting the best plants and arranging them so that each one has enough space and comfort, the most satisfying process begins - pollination.

At the moment when all the stigmas on the mother plants have opened, and the pollen sacs on the father plants have matured, produced pollen, and begun to open, it’s the perfect time to move on to pollination - the beginning of a new population.

Post-pollination stage.
After a week of pollination, we can observe clear signs of a successful process on the mother plants. During the post-pollination stage, active seed development begins within the flowers.

Once the beginnings of seeds are visible on each cola, both top and lower, we can safely remove the male plants, as they have already fulfilled their role in this production. It’s incredibly beautiful to witness new life emerging inside each flower.
In the coming weeks, the mother plants will be focused solely on the active maturation of seeds within the buds. As all plants have already been selected based on growth, structure, and the timing of their transition into flowering, what lies ahead is the final selection stage.
This will be the most important selection, as we will now be able to evaluate bud structure and keep only those that meet all of our criteria. At the same time, the key objective is the search for that specific terpene profile we are chasing in this run, in order to preserve the best genetics across all aspects.
Amnesia Haze - Final Stage Before Harvest
Our Amnesia Haze cycle is moving into its final stage and is now close to completion. At this point, we are approximately two weeks away from harvest, and the plants are fully expressing their character. Structure is set, flowers are well formed, and the overall development is exactly where we want it to be.

One of the most striking aspects right now is the aroma. The entire grow space is filled with that unmistakable haze profile we have been aiming for. It is a deep, nostalgic scent that instantly takes you back. Sharp, complex, and familiar in the best possible way. This is exactly the direction we were working toward from the very beginning.

We are sharing photos that already show the full strength of this Amnesia Haze. The plants are dense, expressive, and consistent across the population. Every detail, from structure to flower formation, reflects the work that has been done throughout the cycle.
In the end, we kept 36 plants in this run. However, the number itself is never the goal. If needed, we would have reduced the selection even further. Whether it is 36 or 15, the principle remains the same. We do not produce for quantity. We always focus on quality.

As we approach harvest, the final stretch becomes all about precision. Monitoring ripeness, maintaining balance in the environment, and allowing the plants to reach their full potential without disruption.
Very soon, we will move into harvest and begin the final evaluation. This is where all the work comes together and shows its true result.
Amnesia Haze - End of the Seed Cycle
And so, we have finally reached the end of this Amnesia Haze journey. The seeds are now fully mature, and the plants are ready to move into harvest.
We may not have mentioned this earlier, but seed runs usually take around two to three weeks longer than regular flower-only cycles. When a plant is focused on producing seeds, its entire rhythm changes, and more time is needed for full maturation. This is why seed production always requires extra patience and precise timing.

Our plants were successfully harvested and moved into drying. After the drying phase was complete, the seeds were carefully processed and separated. This marks the completion of one chapter of the project, but in reality, the most important part is only beginning.
The next step is testing the final result and, most importantly, continuing to improve the haze terpene profile. Haze remains an untouchable classic within our niche. Even today, growers and smokers continue to appreciate that unmistakable old-school aroma and effect.

Our goal is not to change the identity of Haze, but to refine it and push it further. We want to preserve that classic atmosphere while making it even cleaner, stronger, and more enjoyable for the final consumer.
And for now, you still have the opportunity to witness the next stages of testing with us. The journey continues, so enjoy the process and stay tuned for future updates.
Join Our Communities to be Updated At All Times
Join Our Discord: Join our biggest community yet so you never miss a drop. Share your grow plans, swap opinions, and connect with fellow growmies in channels dedicated to our freshest releases.
Follow Us On Instagram: Don't forget to also follow us on Instagram for the newest photos of our genetics and event reports!
Join Grow Diaries: Got your own plants? Share your grow on Grow Diaries and get some inspiration from other gardens!
Join Our Twitter/X: Another great community we have!
Comments